MPM 2 +1 GND 11mm Field Wire DIN 43650 B Solenoid Coil Connector
Solenoid valve type A solenoid valve plug connector-2+PE/3+PE; pin spacing is 18mm, round or square base
B-type solenoid valve plug connector-2+PE; there are two specifications of pin spacing 9mm or 11mm
C-type solenoid valve plug connector-2+PE/3+PE; pin spacing is 8mm or 9.4mm
How to wire an DIN Electrical Connector
It is good practice to wire the electrical DIN connector, based on the same principles as you should do at home.
It is however best practise and probably essential when working in damp environments to achieve the correct IP Protection Rating that you use the correct size of the cable into the conduit entry so that the rubber grommet fits firmly against the external cable sleeve to prevent water ingress into the connector.
Dimension of Soelnoid Valve Connector:
DIN 43650A Connector:
| Dimension | DIN Type | |
 | Distance | |
| Form | |
| | |
| | |
| Fixing Screw | |
| Nomical Current | |
| Contact Resistance | |
| Max Conductor Section | |
DIN43650B Connector:
| Dimension | DIN Type | |
 | Distance | |
| Form | |
| | |
| Working Voltage | |
| Fixing Srew | |
| Nomical Current | |
| Cntact Resistance | |
| Max Conductor Section | |
DIN43650C Connector:
| Dimension | DIN Type | |
 | Distance | |
| Form | |
| Protection Class | |
| Working Voltage | |
| Fixing Screw | |
| Nomical Current | |
| Cntact Resistance | |
| Max Conductor Section | |
More Solenoid Connectors:
 |  |  |
| DIN43650A | DIN43650B | DIN43650C |
Product Features:
The connectors is used extensively to provide electrical connection in a wide range of applications.
The most common application for connectors is in conjunction with pneumatic, hydraulic or electromagnetic devices, including solenoid valves.
Other applications include, for example, pressure transducers, proximity switches, level sensors, limit switches and low energy motors.
BRANDO company manufactures an extensive and comprehensive range of connectors with standard options including for example LED illuminated devices as well as VDR, diodes or transil diodes (with or without illuminated device) to offer protection against over voltage peaks.
Our connectors offer protection from dust and water (IP65 or IP67 on specific request) when correctly installed with screw and gasket which are supplied together with the connector.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Product Tags:
|
|
MPM 2 +1 GND 11mm Field Attachable DIN 43650 Form B Solenoid Coil Connector Images
|
